How To Fix –

Format USB disk as FAT file system.
Download the Phoenix crisis recovery tool –    Link
Extract the files and run WINCRIS.exe.
How To Fix Lenovo BIOS Failure [PHOENIX BIOS]

If it doesn’t run and give an error try to run it in compatibility mode like shown below.

How To Fix Lenovo BIOS Failure [PHOENIX BIOS]

 Once the application opens, select the formatted USB stick.
How To Fix Lenovo BIOS Failure [PHOENIX BIOS]

Click the “Start” button wait until this message pops up and click OK (Do not close WINCRIS.EXE)
How To Fix Lenovo BIOS Failure [PHOENIX BIOS]image 4

Choose “YES”,and hit start again and exit the tool.
image 5

Remove your USB stick and reconnect.
Copy the files “MINIDOS.SYS” and  “PHLASH16.EXE” that are present in the same folder as the tool to USB Pen Drive.
Copy your bios with name “bios.wph” (BIOS file differs for each laptop model,The one included in the zip is for G450 ONLY. If you have any other Lenovo model kindly read the note below)

“bios.wph” included in the zip is for G450 ONLY, If you have a different model make sure to REPLACE the included file with the “bios.wph” file of your model, download the BIOS file specific for your model from the Lenovo website and extract the downloaded .exe (Use 7-Zip) file to obtain the “bios.wph” file for your model.

 Once your USB Pen Drive looks like this, you are ready to go.
Lenovo BIOS Failure

 Recovering the laptop :

Turn off your laptop, disconnect the power source, plug in the USB stick.
Connect the Power source, Press and hold “fn” key + “R” and while doing so hit the power button and wait for 5 seconds until you see the pen drive blink and the fan running.
Leave your laptop alone for few minutes and it will reboot on its own, if not then simply remove and replace the battery and turn it on and keep your fingers crossed.
BIOSBIOS FailureLenovo

TUTORIALS 4458647492703347133

Post a Comment


Home item